SMALL BLOCK CHEVY BLUE Small CAP HEI Distributor, SPARK PLUG WIRES under exhaust

NEW HI-PERFORMANCE BLUE SMALL BLOCK CHEVY SMALL CAP HEI DISTRIBUTOR AND BLUE 8MM SPIRAL CORE SPARK PLUG WIRES (routed under exhaust manifold) THAT ARE MADE IN U.S.A.!! 
Brand New Small Block Chevy Small Cap HEI Distributor. This distributor is also know as a Ready-To-Run distributor.  Distributor cap is BLUE.  DISTRIBUTOR comes with a 3 YEAR WARRANTY!!  This distributor requires an external 12 volt coil for electronic ignition and is NOT included in this listings. Distributor works on Small Block Chevy 265-283-302-305-307-327-350-400.  If you want this distributor & spark plug wires set with a coil, please check out my other listings.  I have the distributor in Red, Blue or Black and the coils in Red, Blue, Black or Chrome.  If you do not see the color combination you want, just message Dan via eBay.  I also have this same electronic distributor with a female (points style) cap.  It has the classic “Points style” look, but is completely electronic.  The female cap style distributor and wires are both available in Red, Blue or Black and the coil is chrome. The female cap listings will be on Ebay sometime 2012, but are available now by messaging Dan on eBay. 
**PLEASE NOTE: YOU MUST RUN EXTERNAL COIL WITH THIS DISTRIBUTOR and it is not included. Coil needs to be 12V and have an output of 40,000 volts or more. If you need a coil, please see my other listings that include the coil with the distributor. This Small Cap HEI Ready-To-Run distributor is made for easy installation. Just hook up the two wires and you are “Ready to Run”!! This distributor comes with easy instructions and  a 3 year warranty. Check out my feedback and buy with confidence.
This Distributor Features:-Small Cap allows for easy fire wall clearance, especially for Pre-1975 that do may not have the room for a large size HEI.
-OEM appearance (also available with female cap)
-Unit is fully CNC machined.
-Fully self-contained distributor with built in Module. Only requires 12 volt External coil for electronic ignition (Typical points coil will not work). No Ballast Resistor is required.
-Easy two wire Hookup (wires included)
-Same as late GM HEI’s except you run an external coil instead of In-cap coil.
-Eliminates the need for all the extra wiring and ballast resistor.
-Major improvement in starting and performance over points
-Built-in GM style module (not made by GM)
-Spark plug gap can run from around 45-50 instead of 35 if you run points.
-Same size as the original points distributors and is fully electronic.
– Much better fuel mileage
– Far less pollution, as the fuel is burned much better
– Faster start ups, especially in cold weather
– Those with carburetors prone to flooding will notice a huge difference, as the spark on electronic ignition is many times stronger than point style ignition.
– Virtually no maintenance, compared to points
– Spark plug life is 3-5 times longer, as well as plug wires
– Much better performance, over points, mostly due to the better combustion of unleaded fuel, as this was the primary reason for the development of electronic ignition.
– Point dwell changes as points wear out, causing your timing to advance dramatically. This brings your engine much closer to detonation, not to mention hard starting, and poor performance.
– Over all engine life is much longer with electronic ignition over points.
Includes BLUE PACKARD WIRE 8mm High Performance Spiral Core Spark Plug wires for Small Block Chevy applications.  Spark plug wires have 90 degree spark plug boots and 90 degree distributor boots that are already factory assembled.  The wires are only 270 Ohms per foot and made in the USA!!  The lower the ohms, the higher the performance!!  The included set of BLUE wires will work on SMALL BLOCK CHEVY (up until mid/late 1980’s) with 265-283-302-305-307-327-350-400 engines using the HEI (male tower) distributor that is also included in this listing and routing the wires under the exhaust manifold. These wires are longer than the “over the valve cover” wires.  These wires are already factory assembled for these engine sizes so you DO NOT cut and crimp on the distributor ends. Although the photo shows 3 coil wires, only one coil wire is included.  Please email/call us and let us know which coil wire you want.  If a coil wire is not selected, the coil wire with both 90 degree female ends will be the one included. 
Details on the wires:

PACKARD WIRE 8mm High Performance Spiral Core Spark Plug Wires have a resistance of ONLY 270 Ohms per foot.
Fits the following stock applications:

Make
Year
Model
Engine

Chevrolet
1980
Corvette, Except California
5.7L 350

Chevrolet
1981
Corvette
5.7L 350

Chevrolet
1982
Corvette, Cross-Fire Fuel Injection
5.7L 350

Chevrolet
1974-1977
Corvette, w/Hei
350

Chevrolet
1978-1979
Corvette
350

Chevrolet md
1975-1980
All 40-80 Series & Chassis, w/Hei
5.7L 350

Chevrolet md
1981-1986
All 40-80 Series & Chassis
5.7L 350

Chevrolet md
1987-1989
All 40-80 Series & Chassis, w/4BBL Carb
5.7L 350

GMC md
1975-1980
All 40-80 Series & Chassis, w/Hei
5.7L 350

GMC md
1981-1986
All 40-80 Series & Chassis
5.7L 350

GMC md
1987-1989
All 40-80 Series & Chassis, w/4BBL Carb
5.7L 350